A city gate station that takes gas at 24 bar and hands it to a medium pressure network at 1.6 bar will hold its setpoint all afternoon, then creep past 2.1 ba...--22 Oct
China R&D pressure regulators are no longer only a cost story. For a DN50 unit holding a 0.4 MPa inlet down to a 30 kPa outlet, the difference between a d...--15 Oct
A procurement engineer at a city gas utility in Southeast Asia received two quotations for the same skid-mounted gas pressure regulating cabinet in early 2026...--10 Oct
A regasification skid rated at 5,000 Nm3/h will not hold a stable downstream set point if the pressure reducing regulator inside it was specified for ambient-...--01 Oct
A city gate station can take natural gas in at 4.0 MPa and hand it down, three stages later, at roughly 2 kPa outside a household meter - a pressure ratio clo...--30 Sep
Gas arrives at a city gate station at anywhere from 200 to 1,500 psi, yet the water heater at the end of the street runs on roughly 0.25 psi. Everything that ...--23 Sep
A 40,000 cubic meter per day gas supply duty can attract two quotes that differ by a factor of three: one prices liquefied gas shipped in by tanker, the other...--16 Sep
In a gas test loop, a few grams of welding scale can be enough to jam a flow meter, score a regulator seat, or make a prototype gas train fail its endurance te...--09 Sep
Start with the Operating Envelope When a gas production facility is being specified, the first question is not which skid to buy but how far upstream the equip...--03 Sep